| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| When is 2 degrees camber not 2 degrees camber... https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=5045 |
Page 1 of 1 |
| Author: | edlan [ Mon Feb 19, 2007 14:13:13 ] |
| Post subject: | When is 2 degrees camber not 2 degrees camber... |
So here's the story. Ever since I got the T2, I've been using the Hudy Ultimate setup system as my only tool for setting up the car. What I didn't notice is that 2 degrees on the Hudy camber gauges is not 2 degrees of camber when I mount my wheels. It comes out to 1~1.5 degrees. When I adjust camber based on my wheels to 2 degrees, it comes out to 2.5~3 degrees on my hudy camber gauges. It would have been nice if they had mentioned this in the setup book. So now, based on the tire wear, I'll add or subtract how much camber to put on the car. |
|
| Author: | althea [ Mon Feb 19, 2007 16:40:32 ] |
| Post subject: | |
| Author: | Tonyv [ Mon Feb 19, 2007 18:56:05 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|