XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
4200 Battery fit in a 007 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=4870 |
Page 1 of 1 |
Author: | bennytheball [ Sun Jan 21, 2007 22:11:14 ] |
Post subject: | 4200 Battery fit in a 007 |
hello, I'm new to x ray. Been another brand driver for a couple of years but fancied a change. Thing is I've bought some 4200 batteries and they don't seem to fit with the low bulkhead, have i got to remove the battey tray thingys every time i want to fit them? Apart from that nice car to build!! Thanks |
Author: | teamgp [ Sun Jan 21, 2007 22:34:12 ] |
Post subject: | |
Author: | bennytheball [ Sun Jan 21, 2007 22:52:17 ] |
Post subject: | |
Author: | teamgp [ Sun Jan 21, 2007 22:55:52 ] |
Post subject: | |
Author: | markrochesterrc [ Mon Jan 22, 2007 00:42:03 ] |
Post subject: | |
Author: | Ashead [ Thu Jan 25, 2007 00:27:00 ] |
Post subject: | |
Check the battery bar as said above. Also try cutting the top part off of the cell retaining blocks on the outerside. This is what i did to allow the batteries to fit in better, and it still keeps plenty of security for the batteries. Remember that many cars have only tape to hold the cells in, so cutting these down a bit should be no problem. |
Author: | changss [ Thu Jan 25, 2007 07:16:15 ] |
Post subject: | |
Author: | bennytheball [ Sun Jan 28, 2007 18:27:07 ] |
Post subject: | |
Thanks for the help especially the last two replies!! The cars all ready to test now, fitting the electrics was entertaining! Not alot of space is there? Thanks again. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |