XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Changing 007' US edition to an EU edition https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=4787 |
Page 1 of 1 |
Author: | ne007 [ Thu Jan 04, 2007 18:26:05 ] |
Post subject: | Changing 007' US edition to an EU edition |
The direction of what the racers at my track want to run has changed from foam to rubber. So, I would like to convert my foam spec to the rubber spec. What all do I need to do this and any suggestions? Thanks |
Author: | FiremanKen [ Fri Jan 05, 2007 07:28:03 ] |
Post subject: | US-EU |
Author: | brano [ Fri Jan 05, 2007 09:54:55 ] |
Post subject: | |
If you want to convert it fully to rubber specs than you have to get the |
Author: | ne007 [ Fri Jan 05, 2007 15:51:40 ] |
Post subject: | |
Author: | brano [ Fri Jan 05, 2007 16:49:51 ] |
Post subject: | |
If you have already T2'007 US kit than you will need only: 301122 Chassis 2.5mm 301178 Upper Deck 303161 Rear Arms - rubber-spec - 2pcs 305102 Xray Multi-Diff 305784 Spur Gear 84T 308382 Spring set - Gold 308383 Spring set - Silver |
Author: | ne007 [ Fri Jan 05, 2007 17:44:02 ] |
Post subject: | |
Author: | brano [ Sat Jan 06, 2007 10:32:02 ] |
Post subject: | |
Author: | ne007 [ Sat Jan 06, 2007 18:07:47 ] |
Post subject: | |
Author: | brano [ Mon Jan 08, 2007 08:34:29 ] |
Post subject: | |
Author: | littleal [ Mon Jan 08, 2007 10:47:08 ] |
Post subject: | |
Author: | HOTWIRE [ Sun Jan 21, 2007 20:38:56 ] |
Post subject: | rubber or foam |
why use rubber instead of foam tires on carpet? |
Author: | Rob Janssen [ Sun Jan 21, 2007 21:15:31 ] |
Post subject: | Re: rubber or foam |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |