XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Gearing T1 FK05 ???? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=4690 |
Page 1 of 1 |
Author: | Z-Rider [ Mon Dec 18, 2006 00:48:57 ] |
Post subject: | Gearing T1 FK05 ???? |
Hey all just joined, great site. This is my second XRAY and I love them. I am going to be running my newly aquired FK05 outdoors on an asphalt parking lot track, fairly large in size most of the time. Running foam tires, 84 tooth spur and a CO27 or similar 27 turn stocker. Can anyone give me a good starting point for a pinion? Thanks in advance for any assistance ![]() Z-Rider |
Author: | maxch [ Mon Dec 18, 2006 12:04:17 ] |
Post subject: | |
Without looking at the track you cant really tell but i would say around 6.5 to 7.5 overall ratio so between a 19 and 22 pinion roughly. But as a good guide your car should reach full speed at about 3/4 way down the main straight. |
Author: | Z-Rider [ Mon Dec 18, 2006 15:58:26 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |