XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Steering bushes https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=4599 |
Page 1 of 1 |
Author: | Swanny [ Mon Dec 04, 2006 02:08:23 ] |
Post subject: | Steering bushes |
When I clip a front wheel against the boards at a track, it breaks the steering knuckle at the bottom resulting in the loss of the bolt and the steel bush that it pivots in. The only way to buy the replacement part is as a set of four - two long and two short. As I have only ever lost the bottom one, I will end up with a number of top bushes left over. I'd like to suggest that XRay make them available as either long or short not as all four (two of each) together as it would be more cost effective to buy only the ones necessary and not have leftovers of ones that aren't. BTW I see also that there is a composite option part which are 1/3 the cost of the steel ones, perhaps this could be done in the same manner as well. |
Author: | teamgp [ Mon Dec 04, 2006 16:23:57 ] |
Post subject: | Re: Steering bushes |
Author: | Swanny [ Mon Dec 18, 2006 01:25:36 ] |
Post subject: | |
Will the T1 steering bushes (Part No. XRA302990) fit in the bottom of the T2 composite c-hubs? They look similar. |
Author: | brano [ Mon Dec 18, 2006 08:37:15 ] |
Post subject: | |
No, the #302290 steel c-hub bushings will not fit T2, you have to get the #302291 ones. |
Author: | caneye [ Tue Dec 19, 2006 01:35:38 ] |
Post subject: | |
Author: | brano [ Tue Dec 19, 2006 08:24:23 ] |
Post subject: | |
1. #302293 is for T1 cars, #302296 is for T2 cars 2. all T2 cars use same steering block I suggest you will check the XRAY T1/T2 Quick Reference Table here at http://www.teamxray.com/teamxray/news/n ... egoria=755 |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |