| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T2 007 EU Multi-flex https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=4529 |
Page 1 of 1 |
| Author: | lonl [ Mon Nov 20, 2006 22:19:53 ] |
| Post subject: | T2 007 EU Multi-flex |
Hi there, I am a little confused on the amount of screws used for the Soft Chassis Multi-Flex setting. Looking at the included setup book, the softest setting looks like there are only 1 screw in each of the front and rear bulkeahds, and none in the layshaft/spur bulkhead. Could that be correct? is there a better diagram that shows the chassis bottom and which screws are used/not used? thanks, Lon BTW it was nice meeting you guys at the IIC. |
|
| Author: | x-rayted [ Tue Nov 21, 2006 23:17:03 ] |
| Post subject: | |
| Author: | lonl [ Wed Nov 22, 2006 19:51:06 ] |
| Post subject: | |
| Author: | Mark Christopher [ Thu Nov 23, 2006 10:59:13 ] |
| Post subject: | |
| Author: | mario [ Fri Nov 24, 2006 11:13:17 ] |
| Post subject: | |
| Author: | lonl [ Sat Nov 25, 2006 19:51:11 ] |
| Post subject: | |
| Author: | Mark Christopher [ Fri Dec 01, 2006 14:57:43 ] |
| Post subject: | |
the stiff setting has one less top deck screw and less in the chassis the med settting has more top deck screws as above and more on the chassis dont more screws make it stiffest???[/b] |
|
| Author: | brano [ Thu Dec 07, 2006 15:21:45 ] |
| Post subject: | |
Here is the link where you can find the publication |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|