XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
set up sheets https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=45 |
Page 1 of 1 |
Author: | redlinezak [ Fri Sep 10, 2004 16:59:13 ] |
Post subject: | set up sheets |
Author: | nnick [ Fri Sep 10, 2004 18:44:22 ] |
Post subject: | |
Author: | redlinezak [ Sat Sep 11, 2004 02:04:40 ] |
Post subject: | |
Author: | nnick [ Sat Sep 11, 2004 07:54:56 ] |
Post subject: | |
Author: | redlinezak [ Sat Sep 11, 2004 18:06:52 ] |
Post subject: | |
Author: | brano [ Mon Sep 13, 2004 14:54:34 ] |
Post subject: | Re: set up sheets |
Author: | mindrev [ Mon Sep 13, 2004 17:26:18 ] |
Post subject: | |
Author: | projectnmt [ Tue Sep 14, 2004 10:15:14 ] |
Post subject: | |
They refer to the thickness of clip to add between the bulkhead and the pivot pin mount. Adding 1mm clip gives ~ 1 deg toe in - 2mm 2deg and so on. |
Author: | mindrev [ Tue Sep 14, 2004 15:48:38 ] |
Post subject: | |
Author: | Arvid Stenberg [ Tue Sep 14, 2004 16:30:46 ] |
Post subject: | |
Author: | mindrev [ Tue Sep 14, 2004 17:02:16 ] |
Post subject: | |
Author: | Arvid Stenberg [ Tue Sep 14, 2004 17:18:34 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |