| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Gear Mesh https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=4439 |
Page 1 of 1 |
| Author: | FOXY923 [ Tue Oct 31, 2006 19:09:31 ] |
| Post subject: | Gear Mesh |
| Author: | Tonyv [ Tue Oct 31, 2006 23:29:47 ] |
| Post subject: | |
No really easy way to do it. It takes a bit of practice to get right. With 64 Dp spurs and pinions you can use the (thin - about 0.2mm) paper trick as you only need a small amount of play. With 48Dp it is easier as you have a bigger tolerance. In this case using the (thin) paper trick will leave you with too little play. In this case you need to use a bit thicker paper (about 0.5mm). Hope that helps. BTW, have a look at some of the other cars, especially those that seem to be very silent as those will have the perfect gear mesh. Once you get the feel for it you will get it right almost every time. |
|
| Author: | teamgp [ Wed Nov 01, 2006 16:41:03 ] |
| Post subject: | |
| Author: | FOXY923 [ Wed Nov 01, 2006 17:54:17 ] |
| Post subject: | |
| Author: | Hurrle [ Wed Nov 01, 2006 23:25:08 ] |
| Post subject: | |
| Author: | teamgp [ Thu Nov 02, 2006 01:27:17 ] |
| Post subject: | |
| Author: | FOXY923 [ Thu Nov 02, 2006 17:57:36 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|