| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T2R-chassis needs to be protected with CA glue ? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=4352 |
Page 1 of 1 |
| Author: | RC-Kompi [ Thu Oct 12, 2006 19:57:32 ] |
| Post subject: | T2R-chassis needs to be protected with CA glue ? |
Hi all, I´m going to buy the T2R. Because there is no specual manual for the T2R I ask my question here: Is there a need to protect and seal edges of T2R-chassis with CA glue as for T2 with graphite chassis ? Regards Stephan (RC-Kompi) |
|
| Author: | mario [ Fri Oct 13, 2006 07:13:29 ] |
| Post subject: | |
| Author: | the_penfool [ Fri Oct 13, 2006 13:34:33 ] |
| Post subject: | |
when i did my t2 i thought it would be difficult but actually its dead easy and dont take that long you just sand the edges with some medium paper till the edges are round then wack some glue on. |
|
| Author: | RC-Kompi [ Sat Oct 14, 2006 23:06:45 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|