T2R/T2 and Team Orion Lipo

trd · **Joined:** Mon Oct 25, 2004 23:18:10 **Posts:** 24

Is there anyway to fit this without modifying the car.

x-rayted · **Posted:** Thu Sep 21, 2006 09:41:19

wich one of the orion lipo's? the 4800 not, the 3200 should fit without modding

JimmyL · **Joined:** Wed Aug 16, 2006 21:05:51 **Posts:** 27

trd · **Joined:** Mon Oct 25, 2004 23:18:10 **Posts:** 24

zoomer · **Posted:** Wed Sep 27, 2006 23:16:48

Mark Christopher · **Posted:** Thu Sep 28, 2006 10:08:57

Sean Rogers · **Posted:** Wed Oct 18, 2006 14:08:38

Mark Christopher · **Posted:** Wed Oct 18, 2006 22:40:31

Sam_Smith · **Posted:** Thu Oct 19, 2006 01:47:35

Mark Christopher · **Posted:** Thu Oct 19, 2006 11:03:21

below is Bens post from rcracechat

"I will try and get a pic of the Lipo, I only removed around .5mm from the top in line with the top deck just in case.

You need to remove the sticker at the bottom and negative side of the lipo and it fits in.

You dont 'have' to do anything else but i did just in case.

Ben"

Sam_Smith · **Posted:** Fri Oct 20, 2006 01:12:50

Ben Cosgrove · **Posted:** Fri Oct 20, 2006 09:57:28

Hi guys

I did remove some of the material from the LiPo but it did 'fit' without it. It does make the chassis stiffer in flexas it 'touches' the top deck.

I actually thought it gave me more steering with a stiffer chassis.

I tried to 'dremel' the LiPo to allow sufficient flex but I did not achieve it.

The overall result is, its fits and it makes the chassis stiffer. LiPo is really cool to drive with especially in 19 turn because it keeps the motor cooler and more consistent throughout the run.

Ben

Bonny · **Joined:** Wed Jul 27, 2005 11:54:38 **Posts:** 33

Mark Christopher · **Posted:** Mon Oct 23, 2006 10:54:31

because the motor revs on the volts and does not loose performance you dont give it as much gas, resulting in a cooler motor

XRAY - Model racing cars

T2R/T2 and Team Orion Lipo

Who is online