| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| NOISY T2 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=3705 |
Page 1 of 1 |
| Author: | T2 SLOW [ Wed May 31, 2006 23:19:37 ] |
| Post subject: | NOISY T2 |
hi all my new t2 is as noisy if not noiseyer than a shaft drive car round a track i have completely stripped the car but it all seems ok! it sounds like a very tight gear mesh but it isnt. it seemsto get noiseyer as you go smaller on the pinion i am running 18.84 all my pinions are RW racing i wonderd if they are not fully compatible with the Xray spur gear any ideas anyone.... cheers |
|
| Author: | haris [ Thu Jun 01, 2006 12:58:58 ] |
| Post subject: | |
did you check if both pinion and spur are of the same pitch? |
|
| Author: | stuartb [ Thu Jun 01, 2006 13:16:42 ] |
| Post subject: | |
I assume it makes the noise all the time eg down the straight and round corners? Does the car run free with no pinion on? I would try a different spur gear and pinion, purhaps borrow it off someone else, that way you can check that they are ok. |
|
| Author: | Vince_Man [ Fri Jun 02, 2006 03:07:53 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|