XRAY - Model racing cars

Post your full setup in the and we'll be able to give you suggestions on changing your setup. Be sure to fill in all of the 'dots' and such.

Can you explain a little better how your car's speed differs from the faster cars. Are you loosing time compared to them at corner entry, middle, and/or exit? What type of corner(s), tight and/or sweepers?

For your setup, it would help if you addressed the following as well:

* Fill in shock oil weight
* Fix the shock piston holes diagram. Currently you're showing 0 holes open in the rear shocks. I would assume you meant that all holes are open, in which case you need to reverse it and delete all of the check marks.
* Select dot for the missing 'rearward' suspension holder settings (0 or 0.75) for both front and rear arms
* Select dot for the upper (tower) and lower (arm) rear shock mount positions
* Select dot for the server saver position
* Fix front camber setting. I would assume you meant -1.0d front camber and not +1.0d
* If you use tire additive, fill in the additive name

Just a little bit more info and we should be able to help.

No problemo.

Have you been able to try the changes yet?

I have added 1 degree toe-out on the front and changed the front spring from white too light blue and 2 degree camber.

The rear has not been touched yet but the results so far look good. I was able to drop my fastest lap time down from 19.16 to 18.86, this does not sound like much but when you consider my average time over 5 min of 19.35sec every 10th becomes vitial.
We have the national meeting at this track in 3 weeks and an average of 19.20 should see me in the top end of the A.
Next test session is on Thursday night and I will be trying diff height from low to medium and new esc settings.
I have the use of another car but I am reluctant.
I will keep you posted.