I have , including red springs, which I tested on HIGH grip indoor asphalt with rubber tires and foams. It's wild, but it actually worked well for both types of tires.
Be advised that it includes the use of a one-way.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| fk05 asphalt foam setup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=3668 |
Page 1 of 1 |
| Author: | dogenia [ Fri May 26, 2006 20:25:38 ] |
| Post subject: | fk05 asphalt foam setup |
| Author: | teamgp [ Fri May 26, 2006 21:01:37 ] |
| Post subject: | |
| Author: | dogenia [ Fri May 26, 2006 21:05:41 ] |
| Post subject: | |
| Author: | teamgp [ Fri May 26, 2006 23:40:06 ] |
| Post subject: | |
I have , including red springs, which I tested on HIGH grip indoor asphalt with rubber tires and foams. It's wild, but it actually worked well for both types of tires. Be advised that it includes the use of a one-way.
|
|
| Author: | dogenia [ Sat May 27, 2006 01:30:43 ] |
| Post subject: | setup |
Would that work with a front diff as well? Do you have a review on this setup posted somewhere? I think I've seen it before. I just finished mixing 37 kg of sugar with water for the track on sunday. I have the one way in my spares box also. Let me know. Don |
|
| Author: | teamgp [ Sat May 27, 2006 03:59:04 ] |
| Post subject: | |
You can find the review . If you're running foams, then I'd recommend using the 'latest one-way carpet/foam setup' listed in the second paragraph of the review. For a front diff, I'd probably run the diff medium to medium-tight and go up to 1d of front toe-out. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|