[phpBB Debug] PHP Warning: in file [ROOT]/includes/session.php on line 561: sizeof(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/includes/session.php on line 611: sizeof(): Parameter must be an array or an object that implements Countable
XRAY - Model racing cars :: View topic - rear end braking lose
XRAY - Model racing cars
https://setup.teamxray.com/xsetup/legacy/

rear end braking lose
https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=355
Page 1 of 1

Author:  Lou [ Wed Oct 27, 2004 07:57:06 ]
Post subject:  rear end braking lose

i just purchased a T1R for 150.00 IBN condition, i thought i got it for an awesome price in my opinion. Anyway, my rearend keeps braking lose exiting some corners and while i'm getting on the throttle exiting corners.

i am running the basic stock setup with the violet front springs and the dark blue on the rear. i am running on asphalt. any suggestions would be appreciated.


thanks

Lou

Author:  projectnmt [ Wed Oct 27, 2004 09:28:35 ]
Post subject: 

basically the car is not transfering enough weight to the rear on power so you can try:
softening the rear springs
reducing the rear damping
increasing the front droop
moving some weight forwards (reduces "pendulum" effects)
increase rear camber (if appropriate)
perhaps increase rear toe in

hope this helps

Author:  Robfo [ Wed Oct 27, 2004 14:20:07 ]
Post subject: 

Try a shorter wheelbase, it should place more weigh over the back wheels andd therefore give you more traction out of the corners.

Author:  MR JOLLY [ Fri Oct 29, 2004 00:44:36 ]
Post subject: 

Lou
Get a pair of whites (on the back) & a set of light blues(2 pairs) stick a pair of light blues on the front,if you want a bit more steering with out upsetting the car to much stick a pair of light blues on the back,just remember you have 2 ends of the car to work in harmony to make a good handling car,I would not suggest shorter wheel base more of longer will be better to stop it rotating on it self to quickly
Also since you are from the states are you running foams or rubbers?

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/