Have a look at this setup I ran last year: . With this you should have a lot of steering.
As for some key differences:
- Move the lower mounting of the rear shock to the outside position.
- Use short top link at the front.
- Run Protoform Mazda 6 body or another aggressive body (bodies make a BIG difference)
- Increase the wheelbase (4mm shims in front of arm)
- Switch to a front spool or one-way
- Remove front stands
- Reduce rear toe-in to maybe 2 degrees
Note that all these changes combined will constitute major changes compared to your current setup so together they may change the balance much too far. So one change at a time
