| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| where to buy t2 screw set https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=3443 |
Page 1 of 1 |
| Author: | jingski [ Mon Apr 17, 2006 05:49:52 ] |
| Post subject: | where to buy t2 screw set |
hi guys i just got a problem with my t2 i strip a screw and the rest is stuck and i dont wanna strip them out..i just wanna know were i can buy a new set of srew so that i can just extract the screw out and change it.. and also any advice so that my screw wont be stuck again? i didnt tight it donwn hard..i was thinking mybe its the impact when you hit or is hit hard the chassis tend to twist and must have lock the screws .. |
|
| Author: | stuartb [ Mon Apr 17, 2006 14:53:28 ] |
| Post subject: | |
Generally i put a little grease around the screw hole (i know others who use super glue) as it is the screw against the carbon that causes the problem. Also make sure that your allen driver is a good one. |
|
| Author: | jingski [ Mon Apr 17, 2006 16:32:17 ] |
| Post subject: | |
i got the integy hex set.. |
|
| Author: | brano [ Wed Apr 19, 2006 07:44:00 ] |
| Post subject: | |
I suggest you will get the |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|