When the shorter camber links are used, the car can enter the turn more agressive. Because the body roll will be less at the rear, there is also less weight transfer and thus less grip!!
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| new roll centre mount https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=344 |
Page 1 of 1 |
| Author: | littleal [ Mon Oct 25, 2004 15:27:12 ] |
| Post subject: | new roll centre mount |
| Author: | frankie [ Mon Oct 25, 2004 16:39:20 ] |
| Post subject: | |
what is the adavantage to using these?? |
|
| Author: | littleal [ Mon Oct 25, 2004 18:08:34 ] |
| Post subject: | |
| Author: | Mister-E [ Wed Oct 27, 2004 21:36:57 ] |
| Post subject: | |
When the shorter camber links are used, the car can enter the turn more agressive. Because the body roll will be less at the rear, there is also less weight transfer and thus less grip!!
|
|
| Author: | daltonshop [ Thu Oct 28, 2004 14:47:09 ] |
| Post subject: | |
| Author: | chipmunk [ Fri Nov 26, 2004 01:23:23 ] |
| Post subject: | |
| Author: | Tonyv [ Fri Nov 26, 2004 12:13:20 ] |
| Post subject: | |
| Author: | John Reid [ Fri Nov 26, 2004 14:11:34 ] |
| Post subject: | Re: new roll centre mount |
| Author: | chipmunk [ Fri Nov 26, 2004 18:42:35 ] |
| Post subject: | |
| Author: | Tonyv [ Sat Nov 27, 2004 18:42:18 ] |
| Post subject: | |
Right, but imagining it did help in seeing that giving the top link more angle increases the camber change didn't it
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|