| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T2 vs T1R: interference https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=3317 |
Page 1 of 1 |
| Author: | Gizmo [ Mon Mar 27, 2006 20:42:56 ] |
| Post subject: | T2 vs T1R: interference |
| Author: | RKeasler [ Mon Mar 27, 2006 20:59:28 ] |
| Post subject: | |
| Author: | Tonyv [ Tue Mar 28, 2006 11:05:55 ] |
| Post subject: | |
Correct. As long as you keep the receiver (crystal) and especially the antenna a few mm away from the chassis you will normally not have problems. |
|
| Author: | Gizmo [ Tue Mar 28, 2006 13:35:20 ] |
| Post subject: | |
Thanks for the advice. I'm currently using a Graupner XS6Pro-Synthesizer (transmitter and receiver), but that won't be a problem (if I build the receiver on a T2-chassis), I assume?! As long as I watch out for the antenne! Thanks again! |
|
| Author: | Tonyv [ Tue Mar 28, 2006 17:29:54 ] |
| Post subject: | |
| Author: | apexracing [ Wed Mar 29, 2006 02:36:50 ] |
| Post subject: | |
Run a specktrum 2.4ghz system you won't have any more glitches ever! |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|