| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T2 Diff and Tool ? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=3158 |
Page 1 of 1 |
| Author: | JLAND [ Wed Mar 01, 2006 13:36:31 ] |
| Post subject: | T2 Diff and Tool ? |
Hi, just got done getting it together, awesome build. Just 1 ? on tools. I have a Hudy wrench set (black handles with silver stripes.) and the 1.5mm wrench head just doesn't work on some of the screw heads like the wheel hexes and the shock hex screws. What are you guys using? Does the cheaper Hudy 1.5mmwrench work? On the diffs, a guy at the track said not to put diff lube on the back of the diff plates (side facing outdrives) because it makes it not as consistant. Any one else found this. I built it like the manual said. Thanks |
|
| Author: | mario [ Fri Mar 03, 2006 10:29:12 ] |
| Post subject: | |
You need to use a thin tip that is possible to slide through the diff hole and the screw head hole. Some batches may vary a bit so on some diff you may find a larger hole, on some a smaller hole. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|