XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
FK05 suspension holders (0.75) https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=3148 |
Page 1 of 1 |
Author: | tolworthracer [ Mon Feb 27, 2006 21:39:30 ] |
Post subject: | FK05 suspension holders (0.75) |
i was wondering i currently run the upgrade 0.75 eceentric suspension holders on the rear of my car and i find tht i have stacks of rear end grip but the front end of my car is all ova the place. so the question im asking is can i fit the 0.75 suspension holders to the front of the car to stop it pushing everywhere i take my car! (mainly low grip tracks). thanks Garry ![]() |
Author: | Tonyv [ Mon Feb 27, 2006 23:21:12 ] |
Post subject: | |
Yes you can. In general on the 05 I allways ran the same position for the front and rear pivot holders. On the 04 I even ran one step higher at the rear than at the front. It sounds like right now you have the front higher than the rear which most likely causes your understeer problem. |
Author: | BSchorr [ Fri Mar 03, 2006 18:42:38 ] |
Post subject: | |
Author: | tolworthracer [ Fri Mar 03, 2006 20:31:26 ] |
Post subject: | knowing wats wat! |
Author: | teamgp [ Fri Mar 03, 2006 20:59:25 ] |
Post subject: | |
Author: | tolworthracer [ Fri Mar 03, 2006 21:05:11 ] |
Post subject: | |
Author: | BSchorr [ Fri Mar 03, 2006 21:05:32 ] |
Post subject: | |
Author: | BSchorr [ Fri Mar 03, 2006 21:08:16 ] |
Post subject: | |
Author: | teamgp [ Fri Mar 03, 2006 21:17:05 ] |
Post subject: | |
Author: | teamgp [ Fri Mar 03, 2006 21:21:46 ] |
Post subject: | |
Author: | BSchorr [ Fri Mar 03, 2006 21:34:31 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |