XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Blades are breaking much fast https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=3097 |
Page 1 of 1 |
Author: | Xin [ Mon Feb 20, 2006 16:28:59 ] |
Post subject: | Blades are breaking much fast |
Author: | Tonyv [ Mon Feb 20, 2006 20:14:28 ] |
Post subject: | |
Author: | B4united [ Mon Feb 20, 2006 20:48:00 ] |
Post subject: | |
Author: | Tom_T2 [ Mon Feb 20, 2006 22:49:07 ] |
Post subject: | |
i run a spool in my T2 and i need to change my blades every 2 to 4 runs and it is both front blades, at £2.99 ($4.95) for 4 this inst cheap. would running a diff be less damaging |
Author: | Mark Christopher [ Mon Feb 20, 2006 23:03:33 ] |
Post subject: | |
yes diff does not load em as much, another thing that makes em split is a clip on the boards when on power! |
Author: | Dan Reynolds [ Mon Feb 20, 2006 23:09:01 ] |
Post subject: | |
Author: | Xin [ Tue Feb 21, 2006 10:39:39 ] |
Post subject: | |
Author: | Ralph [ Wed Feb 22, 2006 00:56:18 ] |
Post subject: | |
The Slots of the Outdrives are very sharp edged, this helps wearing out the Blades very much, i for myself break this edges by using a Dremel with a Grinding Stone an beveling a smal radius. Since the FK04 i do this to the Springsteel Outdrives and change Blades only 4 times a year. btw i use GM Brillant 27T Motor also in 7min runs. I belief GM Brillant 27T is way different to US or UK Legal 27T Motors The average Brillant has 150W / 133N/mm / 24500u/min so it is a little more agressive ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |