| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T1FK'05 Tweaked Chassis https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=3079 |
Page 1 of 2 |
| Author: | Vertigo Performance [ Fri Feb 17, 2006 23:42:56 ] |
| Post subject: | T1FK'05 Tweaked Chassis |
| Author: | Frans H [ Sat Feb 18, 2006 00:20:11 ] |
| Post subject: | |
| Author: | Vertigo Performance [ Sat Feb 18, 2006 00:23:40 ] |
| Post subject: | |
| Author: | Frans H [ Sat Feb 18, 2006 00:27:14 ] |
| Post subject: | |
| Author: | ChrisP [ Sat Feb 18, 2006 09:47:21 ] |
| Post subject: | |
| Author: | Vertigo Performance [ Sat Feb 18, 2006 18:55:06 ] |
| Post subject: | |
| Author: | Peter Szuhai [ Sat Feb 18, 2006 20:15:15 ] |
| Post subject: | |
| Author: | Vertigo Performance [ Sat Feb 18, 2006 21:02:39 ] |
| Post subject: | |
Peter, You may want to check your information before you post with such conviction. I own an RC company and could care less who owns the product if it is our fault we fix it. Carbon doesnt tweak unless it is REALLY beat and even then it would be hard pressed to show signs of tweaking.Our companies main products are Carbon and I am 100% sure what the issue with the chassis is. ANYWAYS!!! Lets get back to why I am here.. I am not here to complain or get half cocked responses, I am here to get information, if you cant help then there really is no reason to post. Anyone willing to offer some advice please feel free, those with nothing better to do than change the direction of this thread please dont. Thanks, Clayton |
|
| Author: | Peter Szuhai [ Sun Feb 19, 2006 03:24:08 ] |
| Post subject: | |
| Author: | Vertigo Performance [ Sun Feb 19, 2006 03:36:06 ] |
| Post subject: | |
| Author: | bmw [ Sun Feb 19, 2006 19:53:41 ] |
| Post subject: | |
| Author: | Vertigo Performance [ Sun Feb 19, 2006 20:17:17 ] |
| Post subject: | |
| Author: | mario [ Tue Feb 21, 2006 15:55:43 ] |
| Post subject: | |
I have seen this problem was already addressed by emails. |
|
| Author: | Vertigo Performance [ Tue Feb 21, 2006 17:43:40 ] |
| Post subject: | |
| Author: | Mark Christopher [ Tue Feb 21, 2006 21:25:42 ] |
| Post subject: | |
what was the out come instead of us all wondering? |
|
| Author: | Vertigo Performance [ Tue Feb 21, 2006 21:33:54 ] |
| Post subject: | |
Xray is dealing with the issue Clayton |
|
| Author: | Mark Christopher [ Wed Feb 22, 2006 13:02:35 ] |
| Post subject: | |
| Author: | ChrisP [ Wed Feb 22, 2006 16:39:27 ] |
| Post subject: | |
| Author: | Steve Rossi [ Wed Feb 22, 2006 18:11:48 ] |
| Post subject: | |
ah just a reminder on the tweak issue.....make sure your top plate is on correctly while building the car i missed it....the bearing cap needs to be on the right hand side Steve |
|
| Author: | Eyeball [ Thu Feb 23, 2006 05:36:19 ] |
| Post subject: | |
T1FK05: I'd just like to ask for someones opinion on this problem I'm having. When I setup my car I check for a tweaked chassis on the 10mm hudy blocks prior to fixing the shocks to the shock mounts. I don't usually have any play on the chassis but when I do it's just a slight bit. I unscrew my adjustable top-deck and bend the chassis slightly until there's no more play. Screw the top-deck back on and check again, always ok after that. I mount the shocks and all electrics (batteries, motors etc) and then proceed to setup the car. When it comes to the hudy tweak station I always and I mean ALWAYS have to adjust the rear shocks with a big difference between them, but front alre always ok. Is this normal??? Thanks, S |
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|