XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
roll centre on t1r https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=303 |
Page 1 of 1 |
Author: | pinkie [ Tue Oct 19, 2004 05:09:48 ] |
Post subject: | roll centre on t1r |
what shock tower [name/part #] should i buy so i can use ther same roll centre.......im using the standard settings and ive bourgt two carbon shock towers both have the roll centre to close and even if i wind the arms in all the way it still doesnt reach any of the roll centre holes................please help |
Author: | John Reid [ Tue Oct 19, 2004 06:59:31 ] |
Post subject: | |
What parts have you bought ![]() I have a selection of shock towers for the Xray and I dont have a problem. The rear link is normally mounted on the bulkhead so I asume it is the front end you are having problems with. The three graphite mounts available from Xray to fit the front end of a "C"hub car have the holes for the link in the same positions as the Raycer moulded part. You may have to use a longer screw and a spacer to get your links at roughly the same angle but thats it. I dont know of any compatability issues with the mounts. If I have missunderstood your question. |
Author: | pinkie [ Tue Oct 19, 2004 09:18:29 ] |
Post subject: | |
i have bought two shock towers 1 from stormer hobbies which is a pivot ball type which i didnt want the other is for a t1 factory and the holes are in totaly diferent positions different so i kneed to get shorter arms so it fits ands its from the front |
Author: | Tonyv [ Tue Oct 19, 2004 09:40:46 ] |
Post subject: | |
All you need is shorter turnbuckle. See this discussion on the subject: . In one of the posts I list the partnumbers for several shorter tunrbuckles. |
Author: | John Reid [ Tue Oct 19, 2004 11:54:45 ] |
Post subject: | |
Author: | pinkie [ Wed Oct 20, 2004 10:29:45 ] |
Post subject: | |
Author: | John Reid [ Sun Oct 24, 2004 11:07:24 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |