| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| car rumbeling of acceleration https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=289 |
Page 1 of 1 |
| Author: | murfy [ Mon Oct 18, 2004 12:21:46 ] |
| Post subject: | car rumbeling of acceleration |
| Author: | Ron [ Mon Oct 18, 2004 12:37:28 ] |
| Post subject: | |
| Author: | murfy [ Mon Oct 18, 2004 12:43:19 ] |
| Post subject: | |
| Author: | Tonyv [ Mon Oct 18, 2004 13:09:05 ] |
| Post subject: | |
| Author: | Ron [ Mon Oct 18, 2004 14:06:28 ] |
| Post subject: | |
| Author: | Tonyv [ Mon Oct 18, 2004 15:15:56 ] |
| Post subject: | |
Are you sure it's the one-way and not the belt skipping? If it is the one-way then it is slipping under power and you need to clean and degrease it again. Best is to leave it in a bath of motor cleaner for 10-20 minutes. Then add one drop of one-way oil to each one-way bearing (no more!). |
|
| Author: | Tonyv [ Mon Oct 18, 2004 15:16:45 ] |
| Post subject: | |
BTW, I'd be very surprised if it is the one-way as your car should be very difficult to drive if the one-way is slipping... |
|
| Author: | Ron [ Mon Oct 18, 2004 15:22:04 ] |
| Post subject: | |
I'm very sure it's not the belt that's slipping.I'll clean the bearings again and we'll see. Tony,thank you very much for your reply. Groetjes Ronald. |
|
| Author: | Tonyv [ Mon Oct 18, 2004 21:28:44 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|