| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T1R hop ups https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=287 |
Page 1 of 1 |
| Author: | cbcbcb [ Sun Oct 17, 2004 20:41:29 ] |
| Post subject: | T1R hop ups |
I want to stiffen up my T1R to try and improve the 'vagueness' of the handling and at the same time use softer springs to improve grip. This effectively gives a set up which is closer to the Evo 2. Which of the following two parts would be better? 301161 Upper Deck EVO 2 - 2.5mm Graphite - CNC Machined 301163 Upper Deck - Wide I race on fairly small indoor carpet tracks with rubber tyres using 19 or 27 turn stock motors. |
|
| Author: | John Reid [ Sun Oct 17, 2004 22:14:35 ] |
| Post subject: | |
The extra wide one would not be compatible with the bulkheads you have, you can use it if you modify the top deck. |
|
| Author: | Chris Reilly [ Mon Oct 18, 2004 04:48:24 ] |
| Post subject: | |
Will the 3.5mm chassis fit ? It's what I would recommend. |
|
| Author: | John Reid [ Mon Oct 18, 2004 21:04:22 ] |
| Post subject: | |
| Author: | brano [ Wed Oct 20, 2004 07:55:39 ] |
| Post subject: | |
| Author: | Giorgio [ Wed Oct 20, 2004 09:27:02 ] |
| Post subject: | |
| Author: | pinkie [ Wed Oct 20, 2004 10:40:41 ] |
| Post subject: | |
| Author: | John Reid [ Sat Oct 23, 2004 13:51:47 ] |
| Post subject: | |
| Author: | John Reid [ Sat Oct 23, 2004 15:34:25 ] |
| Post subject: | |
Will post another picture when the mod is completed. did the mod, easy if you have the right tools [img][img]http://www.jr010a0738.pwp.blueyonder.co.uk/SMTCA/links/xrc2.JPG[/img][/img][/url] |
|
| Author: | brano [ Mon Oct 25, 2004 08:10:23 ] |
| Post subject: | |
| Author: | cbcbcb [ Fri Oct 29, 2004 20:23:47 ] |
| Post subject: | Re: T1R hop ups |
| Author: | John Reid [ Sat Oct 30, 2004 00:14:17 ] |
| Post subject: | Re: T1R hop ups |
| Author: | Frans H [ Wed Nov 03, 2004 18:54:04 ] |
| Post subject: | |
when you don't have the FK bulkheads you cannot use the 3.5 mm chassis because the arms ( long or short one's ) need to be fitted on the middle hole on the bulkhead. You can adjust the chassis like shown on the pictures here above but it's cheaper to sell your racer to someone who's getting started and buy a brand new Factory kit. Then you will have everything new. |
|
| Author: | John Reid [ Thu Nov 04, 2004 12:21:43 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|