XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Where to put weight on T2 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2865 |
Page 1 of 1 |
Author: | espeng [ Mon Jan 16, 2006 01:52:38 ] |
Post subject: | Where to put weight on T2 |
Author: | BSchorr [ Mon Jan 16, 2006 02:56:25 ] |
Post subject: | |
Author: | CoryCraig [ Mon Jan 16, 2006 03:10:30 ] |
Post subject: | |
Author: | espeng [ Mon Jan 16, 2006 03:24:14 ] |
Post subject: | |
Author: | teamgp [ Mon Jan 16, 2006 03:34:20 ] |
Post subject: | |
Author: | ChrisP [ Mon Jan 16, 2006 04:45:22 ] |
Post subject: | |
Author: | Peter Szuhai [ Mon Jan 16, 2006 06:02:35 ] |
Post subject: | |
Author: | espeng [ Mon Jan 16, 2006 09:57:20 ] |
Post subject: | |
Author: | Rob Janssen [ Mon Jan 16, 2006 12:38:54 ] |
Post subject: | |
Author: | teamgp [ Mon Jan 16, 2006 16:00:20 ] |
Post subject: | |
Author: | espeng [ Mon Jan 16, 2006 18:26:31 ] |
Post subject: | |
Author: | Peter Szuhai [ Mon Jan 16, 2006 18:59:13 ] |
Post subject: | |
Try tungsten ![]() |
Author: | Frans H [ Mon Jan 16, 2006 20:25:26 ] |
Post subject: | |
Hi Espeng, I raced the car last weekend at DHI cup and also had to add 100 gramms. I put 40 gramms in the centre off the car using the the brass colored weights. Had on the battery side 20 gramms front and 20 gramms rear, and on the motor/electrics side 10 gramms front and rear. If you use balancing weights from real car wheels You can put about 70 gramms in, in the middle. Hopes this will help you, Frans |
Author: | liquid [ Mon Jan 16, 2006 23:35:30 ] |
Post subject: | |
Author: | espeng [ Tue Jan 17, 2006 03:20:51 ] |
Post subject: | |
Author: | Tonyv [ Tue Jan 17, 2006 19:15:43 ] |
Post subject: | |
Author: | Mhejjas [ Fri Jan 20, 2006 22:31:57 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |