XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Tire grooving on the inside edges https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=281 |
Page 1 of 1 |
Author: | alana07 [ Sat Oct 16, 2004 05:07:05 ] |
Post subject: | Tire grooving on the inside edges |
Author: | John Reid [ Sat Oct 16, 2004 12:37:58 ] |
Post subject: | |
This is often caused by the inserts not supporting the tyres properly. You normally run the softest inserts you can get away with to allow the tyre to conform to the road as best it can. I am not familiar with the particular tyre or insert as I normally run the CS range. As far as air gap goes, I dont normally use one.. so I cant comment. Dont understand how a "flat" tyre can be a good thing on the car. |
Author: | siwoon [ Sun Oct 17, 2004 13:59:47 ] |
Post subject: | Inserts. |
Author: | alana07 [ Mon Oct 18, 2004 06:51:30 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |