XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
VFS-1 Pro VS VFS-1 Pro Comp? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2788 |
Page 1 of 1 |
Author: | darkxer [ Tue Jan 03, 2006 01:13:34 ] |
Post subject: | VFS-1 Pro VS VFS-1 Pro Comp? |
Does anyone know the difference between the Vfs-1 Pro and the VFS Pro Comp? Alot of xray drivers seam to be using ko propo and I thought I'd ask this question from xray drivers. |
Author: | raycer_on_the_run [ Tue Jan 03, 2006 02:00:50 ] |
Post subject: | |
the differance is the pro has a carbon fiber printed case and it has no thermal protection circuit. |
Author: | ChrisP [ Tue Jan 03, 2006 02:04:53 ] |
Post subject: | |
I thought the comp still had a thermal protection circuit...but it was set at a higher setting??? You can still have the thermal lockout removed on either version though... check out rctech.net for a very large thread on the VFS-1 |
Author: | darkxer [ Tue Jan 03, 2006 03:20:09 ] |
Post subject: | |
Author: | ChrisP [ Tue Jan 03, 2006 06:09:24 ] |
Post subject: | |
Author: | darkxer [ Tue Jan 03, 2006 06:35:28 ] |
Post subject: | |
Author: | ChrisP [ Tue Jan 03, 2006 06:58:51 ] |
Post subject: | |
Author: | raycer_on_the_run [ Tue Jan 03, 2006 07:27:37 ] |
Post subject: | |
Author: | ChrisP [ Tue Jan 03, 2006 15:24:07 ] |
Post subject: | |
According to several users and KO PROPO STAFF..there is indeed a temp cutoff on the Twister 2.1 and VFS-1 Comp...... Personally...I think I'd rather have an ESC with thermal protection (set at a reasonable level to engage only when the ESC is put at risk) The included insert is a bad translation...please refer to page 47 of the rctech.net vfs-1 thread.... A couple of friends are using the VFS-1 and loving it so far....looking into one for myself now as well... |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |