XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4"19 kit build questions https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=27393 |
Page 1 of 1 |
Author: | johnmurphyjr [ Fri Feb 15, 2019 04:26:58 ] |
Post subject: | T4"19 kit build questions |
Step #2, Central Transmission, Page 10, There is an important note about screw #5 that I'm a little confused about. I will be running on a new indoor carpet track which should be med-high grip. Does that mean I only install 1 - #5 screw in the motor mount plate front hole location shown and no other #5 screws are installed? 2nd question. I will be running in a 17.5 turn stock class, medium sized carpet track w/ at least one long straightaway and some technical section, rubber tires and no suacing allowed, 2S lipo. Any reccomendation on what size pinoin I should start out with using the kit included 84T spur gear? |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |