XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Brushless Motors https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2649 |
Page 1 of 1 |
Author: | yyhayyim [ Tue Nov 29, 2005 01:58:12 ] |
Post subject: | Brushless Motors |
Author: | vadn1 [ Tue Nov 29, 2005 06:13:40 ] |
Post subject: | |
Author: | drewdc [ Tue Nov 29, 2005 07:13:50 ] |
Post subject: | |
Author: | Tonyv [ Tue Nov 29, 2005 20:30:10 ] |
Post subject: | Re: Brushless Motors |
Author: | Hagberg [ Tue Nov 29, 2005 20:58:51 ] |
Post subject: | |
Author: | yyhayyim [ Tue Nov 29, 2005 21:18:05 ] |
Post subject: | |
Author: | yyhayyim [ Tue Nov 29, 2005 21:21:58 ] |
Post subject: | |
Author: | roychiu [ Wed Nov 30, 2005 04:32:15 ] |
Post subject: | |
Author: | Tsuiyuen [ Wed Nov 30, 2005 05:09:06 ] |
Post subject: | |
Author: | Didi [ Fri Dec 02, 2005 17:55:08 ] |
Post subject: | |
Author: | Bart_Banaan [ Fri Dec 02, 2005 18:11:47 ] |
Post subject: | |
My T1FK'05 is powered by a LMT5300 with Warrior 9918 controller, fed by a 3S - 3200mAh/20C LiPo cell. Speeds go well over 100mph: More pictures: http://www.bb-hardware.com/modules/xgal ... un-alkmaar |
Author: | yyhayyim [ Sun Dec 04, 2005 17:24:52 ] |
Post subject: | |
Author: | Tsuiyuen [ Sun Dec 04, 2005 18:59:52 ] |
Post subject: | |
Author: | drewdc [ Mon Dec 05, 2005 06:28:52 ] |
Post subject: | |
Author: | yyhayyim [ Mon Dec 05, 2005 21:02:10 ] |
Post subject: | |
The GTB can handle the 3.5 motors, according to the Novak engineer. Thtas good news. Atsushi Hara has been very busy trying ou their new motors and he has indicated the him, alosng with other top racers and going to use burshless systems off-road and on-road for 2006. LRP's new Q3 esc is also comming out soon, and it too has LiPo battery hook-up and support capability to handle hte new battery revolution supposed to strike 2006. |
Author: | Tonyv [ Wed Dec 07, 2005 00:46:00 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |