XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
rear grip https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=262 |
Page 1 of 1 |
Author: | Ron [ Wed Oct 13, 2004 13:30:44 ] |
Post subject: | rear grip |
Author: | Tonyv [ Wed Oct 13, 2004 14:51:24 ] |
Post subject: | |
Author: | Ron [ Wed Oct 13, 2004 15:02:47 ] |
Post subject: | |
Author: | Ron [ Wed Oct 13, 2004 15:22:03 ] |
Post subject: | |
Author: | Tonyv [ Wed Oct 13, 2004 16:09:01 ] |
Post subject: | |
Ok, try the 0 degree anti squat in the middle mounting. Also try running the wheelbase 1mm or 2mm shorter. Finally, you may want to try 35w oil at the front or even front and rear. |
Author: | Ron [ Wed Oct 13, 2004 16:10:56 ] |
Post subject: | |
Thanks Tony, I'll try that. Ron |
Author: | Hagberg [ Wed Oct 13, 2004 16:11:43 ] |
Post subject: | |
Your setup seems to be OK. Check your tires, the gluing is very important, if the rubber gets loose from the rim you will loose grip directly. You can also try a spool, this will increase rear grip a lot. |
Author: | Ron [ Wed Oct 13, 2004 16:15:29 ] |
Post subject: | |
Thanks Alexander, The tires are new(pre clued)and seems OK Ron |
Author: | loony toon [ Wed Oct 13, 2004 16:23:42 ] |
Post subject: | |
i don't trust the glueing on the CS range of pre glued tyres. i ripped a tyre (literally ripped it) accross the belt because of poor glueing and it came off mid range and ripped. so from now i always "re-glue" them as soon as i open the packet. |
Author: | Andreas Myrberg [ Fri Oct 15, 2004 21:25:32 ] |
Post subject: | |
Hi, What Caster are you running? Best regards Andreas Myrberg |
Author: | Ron [ Sat Oct 16, 2004 09:21:35 ] |
Post subject: | |
Hi Andreas, I'm driving 3 degree caster.Does this affect the rear grip? Ronald |
Author: | Robertb [ Mon Oct 18, 2004 19:17:19 ] |
Post subject: | |
Author: | Ron [ Mon Oct 18, 2004 20:01:02 ] |
Post subject: | |
Author: | Robertb [ Mon Oct 18, 2004 23:18:01 ] |
Post subject: | |
Author: | Ron [ Tue Oct 19, 2004 09:10:16 ] |
Post subject: | |
Hi Robert, I think your english is very good and so look the set-up. I'll try it for sure. Thank you for your reply and I'll let you know what I think of your set-up. Greetz Ron |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |