rear grip

Tonyv · **Posted:** Wed Oct 13, 2004 16:09:01

Ok, try the 0 degree anti squat in the middle mounting. Also try running the wheelbase 1mm or 2mm shorter. Finally, you may want to try 35w oil at the front or even front and rear.

Ron · **Posted:** Wed Oct 13, 2004 16:10:56

Thanks Tony,

I'll try that.

Ron

Hagberg · **Posted:** Wed Oct 13, 2004 16:11:43

Your setup seems to be OK.

Check your tires, the gluing is very important, if the rubber gets loose from the rim you will loose grip directly.

You can also try a spool, this will increase rear grip a lot.

Ron · **Posted:** Wed Oct 13, 2004 16:15:29

Thanks Alexander,

The tires are new(pre clued)and seems OK

Ron

loony toon · **Posted:** Wed Oct 13, 2004 16:23:42

i don't trust the glueing on the CS range of pre glued tyres.

i ripped a tyre (literally ripped it) accross the belt because of poor glueing and it came off mid range and ripped.

so from now i always "re-glue" them as soon as i open the packet.

Andreas Myrberg · **Posted:** Fri Oct 15, 2004 21:25:32

Hi,
What Caster are you running?

Best regards
Andreas Myrberg

Ron · **Posted:** Sat Oct 16, 2004 09:21:35

Hi Andreas,

I'm driving 3 degree caster.Does this affect the rear grip?

Ronald

Robertb · **Posted:** Mon Oct 18, 2004 19:17:19

Ron · **Posted:** Mon Oct 18, 2004 20:01:02

Robertb · **Posted:** Mon Oct 18, 2004 23:18:01

Ron · **Posted:** Tue Oct 19, 2004 09:10:16

Hi Robert,

I think your english is very good and so look the set-up.
I'll try it for sure.
Thank you for your reply and I'll let you know what I think of your set-up.

Greetz Ron

XRAY - Model racing cars

rear grip

Who is online