| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| short arms on t1r? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2490 |
Page 1 of 1 |
| Author: | d-r-i-f-t-e-r [ Thu Oct 27, 2005 21:55:05 ] |
| Post subject: | short arms on t1r? |
| Author: | drewdc [ Fri Oct 28, 2005 07:27:43 ] |
| Post subject: | |
| Author: | d-r-i-f-t-e-r [ Fri Oct 28, 2005 08:23:03 ] |
| Post subject: | |
| Author: | Vassago [ Fri Oct 28, 2005 09:33:36 ] |
| Post subject: | |
| Author: | d-r-i-f-t-e-r [ Fri Oct 28, 2005 14:28:32 ] |
| Post subject: | |
| Author: | xdriver [ Fri Oct 28, 2005 19:57:51 ] |
| Post subject: | |
| Author: | ianp [ Fri Oct 28, 2005 22:31:50 ] |
| Post subject: | |
| Author: | Vesa [ Fri Oct 28, 2005 23:02:02 ] |
| Post subject: | |
| Author: | ianp [ Sun Oct 30, 2005 19:14:40 ] |
| Post subject: | |
| Author: | ianp [ Fri Dec 02, 2005 17:05:19 ] |
| Post subject: | |
| Author: | drewdc [ Sat Dec 03, 2005 05:09:37 ] |
| Post subject: | |
Because the arms are on the out side of the bulk head. Instead of having the big arm mount in front of the arm you put it on the back to maintain the oringinal toe angle. The big arm mount (front arm mount) on the right side now goes behind the left arm and the arm mount that was there goes in front of the right arm. Instead of putting the clips on the back mount you put it on the front mount. The toe is still the same: 0 clips = 3 toe in, 1 clip = 2 toe in, 2 clips = 1 toe in. You will see what I mean when you do it. |
|
| Author: | drewdc [ Sat Dec 03, 2005 05:16:49 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|