XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Gearing for FK'04 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2457 |
Page 1 of 1 |
Author: | diablo [ Sun Oct 23, 2005 11:07:40 ] |
Post subject: | Gearing for FK'04 |
Author: | diablo [ Mon Oct 24, 2005 02:49:20 ] |
Post subject: | |
Anyone can help? Currently I have using 124 with 33. Is that okay? |
Author: | Speedo [ Mon Oct 24, 2005 06:15:06 ] |
Post subject: | |
It really depends on the track. A good rule of thumb is to gear the motor so that it stops accelerating 3/4 of the way down the straight. Your FDR with a 33 tooth pinion is 6.5 (124/33*1.77). 6.5 is pretty low for a low wind mod motor, but like I said it does depend on the track. Also keep in mind that another general rule of thumb is to go down a tooth on your pinion for each wind you drop. For example, if you are running a 33 tooth pinion on a 10 turn motor, go to a 32 tooth pinion on a 9 turn. Josh |
Author: | diablo [ Mon Oct 24, 2005 06:47:46 ] |
Post subject: | |
Thanks Josh , what is the FDR in average? By the way, any more advice? Can anyone share with us, what is the ratio (eg. 124/33) you are using for your FK'04? |
Author: | drewdc [ Mon Oct 24, 2005 07:44:19 ] |
Post subject: | |
Author: | diablo [ Mon Oct 24, 2005 08:36:22 ] |
Post subject: | |
What is rollout, how can it be caculated? Also how do I know it hit peak revs 3/4 down the straight? Thanks!! |
Author: | teamgp [ Mon Oct 24, 2005 08:52:53 ] |
Post subject: | |
Take a look at the in the Tech Articles thread. |
Author: | saabdrifter [ Mon Oct 24, 2005 18:22:40 ] |
Post subject: | |
Are there any set up sheets for the FK04? I still run one and cannot find any. Thanks |
Author: | mario [ Mon Oct 24, 2005 20:40:48 ] |
Post subject: | |
There are couple of set-up sheets available in the Download area of T1FK04 here http://www.teamxray.com/teamxray/produc ... egoria=111 |
Author: | michelle [ Mon Oct 24, 2005 21:13:23 ] |
Post subject: | |
Author: | saabdrifter [ Tue Oct 25, 2005 00:16:56 ] |
Post subject: | |
Author: | drewdc [ Tue Oct 25, 2005 08:10:06 ] |
Post subject: | |
Author: | Drifter [ Wed Jul 19, 2006 22:28:06 ] |
Post subject: | |
Hi there! I've been looking for a T1 FK04 Gear ratio chart but haven't found. ![]() |
Author: | Drifter [ Thu Jul 20, 2006 20:25:01 ] |
Post subject: | |
Author: | teamgp [ Fri Jul 21, 2006 04:32:40 ] |
Post subject: | |
Sorry for the delay. ![]() You can generate the chart you desire at . |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |