| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Motor Heat sinks, good, bad or ugly https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2409 |
Page 1 of 1 |
| Author: | rcflyers [ Sat Oct 15, 2005 20:38:20 ] |
| Post subject: | Motor Heat sinks, good, bad or ugly |
| Author: | rcflyers [ Sat Oct 15, 2005 20:42:18 ] |
| Post subject: | |
| Author: | Charles Godwin [ Sat Oct 15, 2005 20:48:00 ] |
| Post subject: | |
I would say the cool can fans would be more effective as they are working all the time, although they are a bit expensive they do work. If you don't want to spend the money on one of them you can make yourself one with a peice of lexan for a bracket, two fans from Much More, tie wraps and a screw and nut. I've made my own and it works very well. Charles |
|
| Author: | rcflyers [ Sat Oct 15, 2005 21:30:37 ] |
| Post subject: | |
Ok, so what would be the most efficient for racing, a heat sink that's not so good at cooling, or a fan, which cools better at the expense of battery voltage? |
|
| Author: | Goonish [ Sun Oct 16, 2005 00:46:25 ] |
| Post subject: | |
Cooling the endbell is MUCH more effective than cooling the can. Look into 5 volt 25mm/30mm fans made by Reedy, Much More, and etc... |
|
| Author: | rcflyers [ Sun Oct 16, 2005 07:46:29 ] |
| Post subject: | |
| Author: | Matt Hirst [ Sun Oct 16, 2005 11:04:07 ] |
| Post subject: | |
| Author: | Sander Roest [ Sun Oct 16, 2005 16:44:17 ] |
| Post subject: | |
| Author: | ripa [ Sun Oct 16, 2005 17:04:08 ] |
| Post subject: | |
| Author: | Matt Hirst [ Sun Oct 16, 2005 18:44:10 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|