XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Need Help https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2394 |
Page 1 of 1 |
Author: | lifelessstupid [ Thu Oct 13, 2005 05:28:18 ] |
Post subject: | Need Help |
Author: | d-r-i-f-t-e-r [ Thu Oct 13, 2005 07:53:24 ] |
Post subject: | |
Author: | RC Infusion.com [ Thu Oct 13, 2005 15:36:02 ] |
Post subject: | Re: Need Help |
Author: | lifelessstupid [ Fri Oct 14, 2005 01:54:33 ] |
Post subject: | |
Author: | Alex Stocker [ Fri Oct 14, 2005 10:00:44 ] |
Post subject: | |
Hi you needn´t to count all the pulliys. Just count the pullys on the middle schaft. If it´s 16 you habe the normal stock pullys and internal 2,125 If you count 18, you have the low geratio pully set. Also the diff pullys are marked with 32 or 34. Stocki |
Author: | littleal [ Fri Oct 14, 2005 10:01:17 ] |
Post subject: | |
Tooth numbers on low ratio kit are written on layshaft pulley and diff pulley sides - may save you some time if you have them - think normal ratio kit does not have the numbers stamped on pulleys. HTH Phil. |
Author: | littleal [ Fri Oct 14, 2005 10:02:26 ] |
Post subject: | |
Beat me to it Stocki!!! |
Author: | Alex Stocker [ Fri Oct 14, 2005 10:17:52 ] |
Post subject: | |
Boing!!!! GRRR, Knuff AAAH Ok, but the FK05 has the numbers stamped on the sides. The FK05 has 34 tooth pullys, the same as the Racer...... So maybe my information is to new, for a racer that where sold a time ago. |
Author: | drewdc [ Fri Oct 14, 2005 11:11:27 ] |
Post subject: | |
The 32 tooth diff pulley has a broken line on one side where the dust cover clips on. The 34 diff pulley's line isn't broken. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |