| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| How sensitive are shocks? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2350 |
Page 1 of 1 |
| Author: | Eyeball [ Thu Oct 06, 2005 08:40:33 ] |
| Post subject: | How sensitive are shocks? |
I know shocks play a major role in handling, but I struggle to get them absolutely even. Will it affect the handling badly if my shock rebound is different from left to right by 0.5mm, or if the rebound on both left and right shocks are just under 50% rebound? I just need to know how precise people are when trying to achieve these settings. Thanks, S |
|
| Author: | SBH [ Thu Oct 06, 2005 10:25:53 ] |
| Post subject: | |
Hey eyeball It's not that important if You get them 100 equal, especially not the length, if You use Your downstop screws. But You could just try it out Yourselve. Make a set of dampers with 60 % rebound in one side, and 40% in the other side, and go back to the track. Good luck 
Soeren |
|
| Author: | Eyeball [ Fri Oct 07, 2005 02:39:25 ] |
| Post subject: | |
| Author: | SBH [ Fri Oct 07, 2005 08:59:21 ] |
| Post subject: | |
0,5mm is fine Once again I will say, try it on the track. You won't notice the difference Søren 
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|