XRAY - Model racing cars

All,

I've found an almost perfect setup that is based off of Josh's nat winning carpet setup.

You can find my setup at: http://www.geocities.com/acquaba/Images ... _setup.jpg

The one gripe I have is the only way to get enough rear grip is to use 30-32 shore rear foams which wear too quickly for my budget. I really don't want to disturb the steering I've found, but I wondered if anyone could suggest any changes that would allow me to use at least 35 shore tires while virtually maintaining the current handling characteristics. Thanks!

Hi,

Just my thoughts.


I would not use our Nitro shoes on Carpet, they are quite different then our 28mm carpet foams. I think you would find that running our 2159 and 2155 (purple/ornage fronts and purple rears) or 2160 and 2156 (double pink/ornage and double pink rears) your car would have a more planted feel while having more forward traction.

Also I noticed you run a trinity oil in the front and a AE oil in the back. Every company has a different way of measuring. I beleive Trinity oil is thinner then AE oil, so that 50 might could be the same or slighly thicker then the AE oil.

I would run XRAY oil 30 or 40 weight with 2 holes open in the front and 3-4 holes open in the back.


hope this helps you find your dialed set up

Korgae

JACO