XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Rear wheel lifting https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2332 |
Page 1 of 1 |
Author: | JAUNE [ Mon Oct 03, 2005 14:57:14 ] |
Post subject: | Rear wheel lifting |
Hi, looking at other drivers setups, I tried to run without antidive in front(2-3) but the rear wheel seem to be lifting off power. I played with rear droop, front sway bar, stiffer front springs, softer and stiffer rear spring, none of that fixed my problem. Anyways with the antidive the car is perfect but I'm just want to know what am I doing wrong? Thanks |
Author: | teamgp [ Mon Oct 03, 2005 15:47:33 ] |
Post subject: | |
Looking at your setup from the 21st of September, if you want to run the car without anti-dive then I suggest the following: * Lower your ride height to anywhere below 5mm front and rear. The closer to 4mm the better. Do your club rules call for 5mm minimum on carpet? * Increase your rear droop to anywhere between 2.5mm and 3.5mm Is the anti-dive causing some type of handling problem that you want to get rid of? |
Author: | JAUNE [ Mon Oct 03, 2005 16:03:14 ] |
Post subject: | |
Author: | teamgp [ Mon Oct 03, 2005 16:37:59 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |