XRAY T1FK and IB3800

OrangeT1R · **Posted:** Fri Aug 26, 2005 01:58:31

I have a T1R and IB3600s and they fit just fine. Are the IB3800's bigger? BTW, the IB batts rule.

teamgp · **Posted:** Fri Aug 26, 2005 02:41:16

The 3700's and 3800's are bigger than the 3300's and 3600's. I'm not sure if this will work, but the chassis preparation tip in the FAQ thread is similar to what you would have to do for the FK and T1R. The difference being the amount of material you would need to bevel per saddlepack side would have to be calculated by using your own eyes. :shock:

It shouldn't be hard to do if you have a little patience and a good eye.

RC517 · **Joined:** Tue Jul 05, 2005 06:11:56 **Posts:** 13

asw7576 · **Joined:** Mon Aug 01, 2005 21:10:49 **Posts:** 15

C5Vette · **Posted:** Mon Aug 29, 2005 22:50:16

I have these cells and they DON'T fit! You can put them in there and tape them in place but forget about a decent roll center. When you stack the cells you'll see that they are WAY bigger than the slots. Stack them next to a 3300 pack and they are between 1/4 to 1/2" longer (around 10mm).

I've run them a couple of times, but stay with the 3700's if you have the choice. Those are a lot closer to the correct size!

Ray

Joep · **Posted:** Mon Aug 29, 2005 23:07:09

RaceDoc · **Joined:** Fri Sep 17, 2004 11:02:49 **Posts:** 1

Hi Joep,

which cell type is better ... the IB3800 or the Team Orion GP3700
looking at power, runtime and lifetime?

drewdc · **Posted:** Thu Sep 01, 2005 11:00:20

Joep · **Posted:** Thu Sep 01, 2005 16:37:52

ChrisP · **Posted:** Sat Sep 10, 2005 05:01:09

Joep · **Posted:** Sat Sep 10, 2005 05:24:08

XRAY - Model racing cars

XRAY T1FK and IB3800

Who is online