XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T1FKO5 CARPET (rubber tyres) https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2089 |
Page 1 of 1 |
Author: | Andy16 [ Thu Aug 11, 2005 17:35:11 ] |
Post subject: | T1FKO5 CARPET (rubber tyres) |
Author: | Charles Godwin [ Thu Aug 11, 2005 17:46:08 ] |
Post subject: | |
Author: | teamgp [ Thu Aug 11, 2005 21:58:09 ] |
Post subject: | |
If the carpet is decent then the traction should be pretty high, even for rubbers. For the standard springs I would suggest mounting the front shocks on the outermost hole and the rear shocks one hole in and maybe close one or two holes on all four pistons. A high roll center in the front and/or rear might be in order as well. I tried running a spool with rubbers on carpet last week and the front tires fought each other too much and the car scrubbed a lot of speed in the corners. This happened with CS 27's and 32's all the way around. I'd suggest either a one way or a diff set to medium/tight if you prefer to use the brakes. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |