XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Anti-rollbars on T1 FK05 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2081 |
Page 1 of 1 |
Author: | Eyeball [ Wed Aug 10, 2005 18:52:57 ] |
Post subject: | Anti-rollbars on T1 FK05 |
Author: | teamgp [ Wed Aug 10, 2005 19:00:24 ] |
Post subject: | |
Author: | Eyeball [ Wed Aug 10, 2005 19:23:23 ] |
Post subject: | |
Author: | teamgp [ Wed Aug 10, 2005 21:22:51 ] |
Post subject: | |
Author: | Eyeball [ Thu Aug 11, 2005 01:06:56 ] |
Post subject: | |
Thanks. It doesn't seem like many drivers use them but would be good to know anyhow. Cheers, S |
Author: | Dan Reynolds [ Thu Aug 11, 2005 01:53:09 ] |
Post subject: | |
I have only used the rear roll bars once but I used them in the outside hole, I tried them on the inside one but they started to make the suspension bind up a bit |
Author: | teamgp [ Thu Aug 11, 2005 06:40:17 ] |
Post subject: | |
I believe they are rarely used with the FK05 since the rear end is lighter than previous T1's and chassis roll is needed in the rear for traction. |
Author: | Frans H [ Thu Aug 11, 2005 08:49:56 ] |
Post subject: | |
I have used the rear anti roll bar only 2 times. Used the inner hole. In my opinion by using the outside hole it will be slightly stiffer. I wanted to test it this weekend but weather predictions are lots of rain ![]() ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |