XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
shockabsorber oil https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=208 |
Page 1 of 1 |
Author: | pippoxray [ Tue Oct 05, 2004 14:31:34 ] |
Post subject: | shockabsorber oil |
Author: | Tonyv [ Tue Oct 05, 2004 21:41:58 ] |
Post subject: | |
Author: | pippoxray [ Wed Oct 06, 2004 14:11:55 ] |
Post subject: | |
Author: | Tonyv [ Wed Oct 06, 2004 14:57:12 ] |
Post subject: | |
Author: | pippoxray [ Thu Oct 07, 2004 14:05:43 ] |
Post subject: | |
hi tony i'm i again can you explain me the main differences between an hard spring with an hard oil(50w) and a softer spring with the same oil(50w) . What type of springs do you should use with a 40w oil? thanks i hope you will understand my bad english |
Author: | Tonyv [ Thu Oct 07, 2004 16:32:16 ] |
Post subject: | |
Author: | pippoxray [ Thu Oct 07, 2004 19:21:18 ] |
Post subject: | |
thanks really really much |
Author: | 1jag8 [ Fri Oct 08, 2004 00:47:33 ] |
Post subject: | |
Tonyv, when you say 3 holes or 4 holes are these closed or open ? Also, I have alot of Trinity shock oil from previous cars so I've been running 40wt in front and 30wt in the rear. How do these compare with Xray oil of the the same number ? Thanks. |
Author: | Tonyv [ Fri Oct 08, 2004 10:51:51 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |