XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T1 FK'04 - Ride Height for Asphalt surface https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2016 |
Page 1 of 1 |
Author: | Peace Out [ Wed Jul 27, 2005 03:30:49 ] |
Post subject: | T1 FK'04 - Ride Height for Asphalt surface |
Author: | Goonish [ Wed Jul 27, 2005 05:37:00 ] |
Post subject: | |
Author: | Matt Hirst [ Wed Jul 27, 2005 07:58:47 ] |
Post subject: | |
Author: | mario [ Wed Jul 27, 2005 08:58:07 ] |
Post subject: | |
Author: | teamgp [ Wed Jul 27, 2005 15:14:24 ] |
Post subject: | |
Author: | Goonish [ Thu Jul 28, 2005 00:11:28 ] |
Post subject: | |
Author: | teamgp [ Thu Jul 28, 2005 16:06:54 ] |
Post subject: | |
Author: | Peace Out [ Tue Aug 02, 2005 08:24:44 ] |
Post subject: | |
Thanks. I adjusted the ride height, dropping it from around 6.5mm to about 6.0mm. With the springs I have, if I lowered it even more it would almost bottom out because it seems the springs are abit too soft. Im running purple medium compound. So the only way I see to stop the slopiness but dropping the ride height further is going to a harder compound spring? |
Author: | teamgp [ Tue Aug 02, 2005 18:33:39 ] |
Post subject: | |
Author: | Peace Out [ Thu Aug 04, 2005 06:50:50 ] |
Post subject: | |
Author: | Goonish [ Thu Aug 04, 2005 09:52:58 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |