Been a while since posting on the forum but glad to see this post about small tracks. I can agree with all of the settings and did have a similar setup to provide some tweaks.
The car has required some very different driving from what I was used to, xray t1 with c-hubs.
My current Setup is also available online under my name but the setup i suggest below is probably more suited.
A more balanced car was the following,
Blue fr 2 clicks 30w
White rr 1 click 30w
1.5 camber all round
downstop 2 fr 5 rr
0 deg toe fr 2 deg rr
(with no weight 3 deg can take you the other way and destablise it)
2mm shim fr 1mm rr
1mm infront for wheelbase
The reason for me posting this is that its not far off the setup mentioned and gives more things to try ! All else was kit setup
roll bar front 1mm can help if you have too much steering into corners, I have also balanced the rear with weight due to it being very front biased !
By all means check out the current setup, but it may make a difficult drive
I was just very quick with it like this.
Last time out it was 6-7 sec laps, is this the kinda tight technical ? (this was actually a more flowing track)