| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| car to taileee https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=2011 |
Page 1 of 1 |
| Author: | supadan [ Tue Jul 26, 2005 04:49:00 ] |
| Post subject: | car to taileee |
wot can i change on the set up to make it less taileeee and wot shood i change if i use the 2mm chassis http://www.teamxray.com/xforum/xform/in ... tup=t1fk05 thanks heaps for your help Daniel |
|
| Author: | Matt Hirst [ Tue Jul 26, 2005 05:09:19 ] |
| Post subject: | |
you could try 2.5, or 3 degree of rear toein. or possibley try 2 holes open on the rear piston. |
|
| Author: | Tonyv [ Tue Jul 26, 2005 07:48:12 ] |
| Post subject: | |
Try shortening your wheelbase if Matt's suggestions don't help enough. |
|
| Author: | drewdc [ Tue Jul 26, 2005 08:41:57 ] |
| Post subject: | |
Try softening the rear springs or/and move the rear shocks in a hole both top and bottom. If this doesn't fix it try the opposite on the front (stiffen the front springs and move the front shocks out a hole both top and bottom). Drew. |
|
| Author: | supadan [ Tue Jul 26, 2005 08:58:23 ] |
| Post subject: | |
thanks heaps guys ill try it |
|
| Author: | supadan [ Tue Jul 26, 2005 09:11:38 ] |
| Post subject: | |
on the wheel base i have a 3mm in front of the arm and a 1 mm behind and that is 257or 258 |
|
| Author: | Charles Godwin [ Tue Jul 26, 2005 10:46:42 ] |
| Post subject: | |
Try a solid 1 way as it is a slightly less aggresive as a 1 way, move the front shocks out and open another piston in the rear shocks, and if it is still a little bit 'tail happy' try 2.5* of rear toe in or 3*. Charles |
|
| Author: | teamgp [ Tue Jul 26, 2005 14:12:39 ] |
| Post subject: | |
| Author: | supadan [ Thu Jul 28, 2005 07:36:40 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|