XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
FK'05 servo saver shaft too long https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1970 |
Page 1 of 1 |
Author: | rcflyers [ Sun Jul 17, 2005 10:27:41 ] |
Post subject: | FK'05 servo saver shaft too long |
I am currently building my FK'05 but the servo saver pivot shaft appears to be too long. I have seated the plastic cups and bearings correctly top and bottom but the shaft is preventing the top deck from sitting flush on the bulkheads. there is a 1-2mm gap between bulkhead and top deck. Any suggestions please? Pictures here http://www.cornwallmrc.co.uk/hr300.html |
Author: | Steve e [ Sun Jul 17, 2005 10:49:36 ] |
Post subject: | |
The top plastic cup it needs to go in a bit more it will stick out the top a bit when its all the way home. |
Author: | rcflyers [ Sun Jul 17, 2005 17:04:39 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |