| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Chasis Weighting https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1963 |
Page 1 of 1 |
| Author: | RC517 [ Sat Jul 16, 2005 00:23:07 ] |
| Post subject: | Chasis Weighting |
| Author: | Tonyv [ Sat Jul 16, 2005 20:11:59 ] |
| Post subject: | |
Yes, the centerline of the car. I use very thin double sided tape that is normally used to tape carpet to floors to mount the centerline weights. |
|
| Author: | RC517 [ Sun Jul 17, 2005 06:52:22 ] |
| Post subject: | |
Thank you for the reply. Just out of curiousity, why are the drilled with mounting holes then? Were they made for the older T1? |
|
| Author: | Tonyv [ Sun Jul 17, 2005 22:41:41 ] |
| Post subject: | |
Yes, the weights have been there since the original T1. |
|
| Author: | redlinezak [ Mon Jul 18, 2005 21:09:55 ] |
| Post subject: | |
was there any specific reason that xray chose not to keep the mounting screw locations for centerline weights? |
|
| Author: | Tonyv [ Wed Jul 20, 2005 22:22:51 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|