XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Kit T4 Shock Collar Orings - Not Sorted https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19625 |
Page 1 of 1 |
Author: | MeBeMikey [ Sun Oct 29, 2017 13:44:44 ] |
Post subject: | Kit T4 Shock Collar Orings - Not Sorted |
Later Edit: Never mind. All O-rings in shock collar, including the O-rings I bought all get stuck. The O-ring is coming out of the collar when adjusting them which is why the collar gets horribly stuck. Ignore what i wrote below. ___________________________________________________________________________________________________ After buying two different kinds of O-rings to try...the kit O-rings have sorted themselves out. After a few weeks the collars turn fine now. I went to switch them out with different ones and now it seems I do not need to. All collars turn with no problem now. So, just stick with them and they sort them selves out after a rebuild. Also, when bleeding out of the top cap allow the oil to spill over the collar. All fixed now. |
Author: | lpittman [ Sat Nov 11, 2017 06:57:42 ] |
Post subject: | Re: Kit T4 Shock Collar Orings - Not Sorted |
Author: | MeBeMikey [ Wed Nov 22, 2017 13:19:56 ] |
Post subject: | Re: Kit T4 Shock Collar Orings - Not Sorted |
i used 350cst oil and covered them quite well. im using collars from a spare set of shocks now |
Author: | Mustafa Alp [ Fri Nov 24, 2017 15:20:56 ] |
Post subject: | Re: Kit T4 Shock Collar Orings - Not Sorted |
Hello, i tell you my solution I cut the o ring into 2, and insert only 1 half to the shock collar.(half circle) Of course also with some shock oil This way collar moves easily with still enough resistance Regards Mustafa |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |