XRAY - Model racing cars

hello guys iam lookning for more information/setup tips when using the a.r.s systeem

first how dow you setup the a.r.s

how do you adjust the toe in whit the adjustable turnbuckle or by the insert ???
what means outbord toe

and how can you check the systeem on the setup bord

thanks

I read the manual again

and see that when you use the a.r.s systeem you need to fit the c-hub left side on the right-side on the car
and the right side c-hub on the left side on the car THATS CORRECT ???

and you make the a.r.s link 57mm.and you dont adjust any more the link
you can adjust the static toe in whit the eccentric bushing

iam no on the good way ???
please let me now

The ARS C hubs are effectively '0' degree (the same left and right), not left or right 4deg like the front C-hubs

I think the left right on the ARS is for the hole in the middle, it appears slightly wider on one side to clear the axle.

oky

how you setup the systeem


how do you adjust the toe in whit the adjustable turnbuckle or by the insert ???
what means outbord toe

and how can you check the systeem on the setup bord

The inserts adjust the angle of the arms, you adjust toe with the 'steering' links

the angle off the arm its toe in or not
you can fine adjust the toe in whit the steering link

or have the angle from the arm diferent function

Toe is only adjusted with the steering link when using ARS.
The angle of the wishbones makes no difference, only the link.
You can fine tune the wheelbase etc with the inserts